Dell 320-9738 manual Product Specific Problems, Specific What You, Symptoms Experience

Win 7 and Win	The cursor does
8 Calibration	not accurately
	follow your finger
	when you touch
	the screen

•Enter control panel to choose the Tablet PC settings.

•Select Calibration.

•Recalibrate your screen following the text on the screen

•Save or give up the calibrate data.

Product Specific Problems

Specific What You Possible Solutions

Symptoms Experience

Screen image is	Image is
too small	centered on
	screen, but does
	not fill entire
	viewing area

•Check the Scaling Ratio setting in the Image Setting OSD.

•Reset the monitor to Factory Settings.

Cannot adjust	OSD does not	• Turn off the monitor, unplug the power cord, plug it back,
the monitor	appear on the	and then turn on the monitor.
with the	screen	• Check whether the OSD menu is locked. If yes, press and
buttons on the		hold the button above the Power button for 10 seconds to
side panel		unlock (for more information, see Menu Lock).
No Input Signal	No picture, the	• Check the signal source. Ensure the computer is not in the
when user	LED light is blue.	power saving mode by moving the mouse or pressing any
controls are		key on the keyboard.
pressed		• Check whether the signal cable is plugged in properly. Re-
		plug the signal cable if necessary.
		• Reset the computer or video player.

The picture	The picture
does not fill the	cannot fill the
entire screen.	height or width
	of the screen

•Due to different video formats (aspect ratio) of DVDs, the monitor may display in full screen.

•Run the built-in diagnostics.

NOTE: When choosing DVI-D mode, the Auto Adjust function will not be available.

48 Troubleshooting