Back to Contents Page
Setting Up the Monitor
Dell™ E2010H/E2210H/E2310H Flat Panel Monitor User's Guide
Attaching the Stand
Connecting Your Monitor
Attaching the Dell Soundbar (Optional)
Removing the Stand Base
Wall mounting (Optional)
Attaching the Stand
NOTE: The stand is detached when the monitor is shipped from the factory.
Remove the monitor cover and place the monitor on it.
1.Fit two tabs on the upper part of the stand to the groove on the back of the monitor.
2.Lower the monitor so that the monitor mounting area snaps onto the stand.
Connecting Your Monitor
CAUTION: Before you begin any of the procedures in this section, follow the Safety Instructions.
To connect your monitor to the computer:
1.Turn off your computer and disconnect the power cable.
2.Connect either the white (digital
Connecting the VGA Cable
Connecting the DVI Cable