Dell E2310H Product Specific Problems, Specific Symptoms What You Experience Possible Solutions

Settings OSD if the Color Management is turned off.

•

Change the Input Color Format to PC RGB or YPbPr in the Advance Setting OSD.

•

Run the built-in diagnostics.

Image retention from a static

Faint shadow from the static

•

Use the Power Management feature to turn off the monitor at all times when not in use

image left on the monitor for a

image displayed appears on

(for more information, see Power Management Modes).

long period of time

the screen

•

Alternatively, use a dynamically changing screensaver.

•

In OSD Menu, under Reset to Factory Settings, select Enable LCD Conditioning. Using

this option may take several hours before the image is eliminated.

•

NOTE: Image Burn-in is not covered by your warranty.

Specific Symptoms

What You Experience

Possible Solutions

Screen image is too small

Image is centered on screen,

•

Reset the monitor to Factory Settings.

but does not fill entire viewing

area

Cannot adjust the monitor with

OSD does not appear on the

•

Turn off the monitor, unplug the power cord, plug back, and then turn on the monitor.

the buttons on the front panel

screen

No Input Signal when user

No picture, the LED light is

•

Check the signal source. Ensure the Computer is not in the power saving mode by

controls are pressed

blue. When press "up", "down"

moving the mouse or pressing any key on the keyboard.

or "Menu" key, the message "

•

Check whether the signal cable is plugged in properly. Re-plug the signal cable if

No input signal " will appear.

necessary.

•

Reset the computer or video player.

The picture does not fill the

The picture cannot fill the

•

Due to different video formats (aspect ratio) of DVDs, the monitor may display in full

entire screen.

height or width of the screen

screen.

•

Run the built-in diagnostics.