![](/images/new-backgrounds/1263663/26366323x1.webp)
Back to Contents Page
Operating the Monitor
Dell™ S1909WN Flat Panel Monitor User's Guide
Using the Front Panel Controls
Using the
Setting the Optimal Resolution
Using the Dell Soundbar (Optional)
Using the Tilt
Using the Front Panel
Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls, an OSD shows the numeric values of the characteristics as they change.
| Front panel Button | Description | |
|
|
|
|
1 |
| Use the MENU button to launch the | |
| Menu |
|
|
|
|
|
|
2 |
| Use this button to directly access the "Brightness/Contrast" menu or to increase the values of the selected menu option. | |
| Brightness&Contrast /Adjust |
|
|
| UP |
|
|
3 |
| Use Auto Adjust to activate automatic setup/adjustment or to decrease the values of the selected menu option. The following | |
|
| dialog appears on a black screen as the monitor | |
| Automatic Adjust /Adjust |
|
|
| Down |
|
|
|
| Auto Adjustment allows the monitor to | |
|
| tune your monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under Image Settings. | |
|
| NOTE: Auto Adjust does not occur if you press the button while there are no active video input signals or attached cables. | |
|
|
|
|
4 |
| Use this button to enter next step of what item you selected. | |
| Enter |
|
|
5 |
| Use the Power button to turn the monitor on and off. | |
| Power | The White LED indicates the monitor is on and fully functional. An amber LED indicates DPMS power save mode. | |
|
|
| |
| (with power light indicator) |
|
|
|
|
|
|