Dell S1909WN appendix Ddc/Ci

Phase

If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase

(fine), again.

NOTE: Pixel Clock and Phase Adjustments are only available for "VGA" input.

Reset Display

Select this option to restore default display settings.

Settings

Other Settings

Select this option to adjust the settings of the OSD, such as, the languages of the OSD, the amount of time the menu remains on

screen, and so on.

Language

Language option to set the OSD display to one of seven languages (English, Espanol, Francais, Deutsch and Japanese).

Menu Transparency

Select this option to change the menu transparency by pressing

or

(Minimum: 0 ~ Maximum: 100).

Menu Timer

OSD Hold Time: Sets the length of time the OSD will remain active after the last time you pressed a button.

Use the

or

buttons to adjust the slider in 5 second increments, from 5 to 60 seconds.

Menu Lock

Controls user access to adjustments. When 'Lock' is selected, no user adjustments are allowed. All buttons are locked except the

button.

NOTE: When the OSD is locked, pressing the menu button takes the user directly to the OSD settings menu, with OSD Lock

selected. Select "Unlock" to unlock and allow user access to all applicable settings.

DDC/CI

DDC/CI (Display Data Channel/Command Interface) allows your monitor parameters (brightness, color balance etc) to be adjustable

via software on your PC. You can disable this feature by selecting "Disable".

Enable this feature for best user experience and optimum performance of your monitor.