Dell E1909W appendix Troubleshooting, Self-Test, Built-in Diagnostics, Common Problems

Page 28

Back to Contents Page

Troubleshooting

Dell™ E1909W Flat Panel Monitor

Self-Test

Common Problems

Video Problems

Product Specific Problems

Dell Soundbar Problems

CAUTION: Before you begin any of the procedures in this section, follow the Safety Instructions.

Self-Test

Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps:

1.Turn off both your computer and the monitor.

2.Unplug the video cable from the back of the computer. To ensure proper Self-Test operation, remove both Digital (white connector) and the Analog (blue connector) cables from the back of computer.

3.Turn on the monitor.

The floating dialog box should appear on-screen (against a black background) if the monitor cannot sense a video signal and is working correctly. While in self-test mode, the power LED remains green. Also, depending upon the selected input, one of the dialogs shown below will continuously scroll through the screen.

or

4.This box also appears during normal system operation, if the video cable becomes disconnected or damaged.

5.Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor.

If your monitor screen remains blank after you use the previous procedure, check your video controller and computer, because your monitor is functioning properly.

NOTE: Self test feature check is not available for S-Video, Composite, and Component video modes.

Built-in Diagnostics

Your monitor has a built-in diagnostic tool that helps you determine if the screen abnormality you are experiencing is an inherent problem with your monitor, or with your computer and video card.

NOTE: You can run the built-in diagnostics only when the video cable is unplugged and the monitor is in self-test mode.

To run the built-in diagnostics:

1.Ensure that the screen is clean (no dust particles on the surface of the screen).

2.Unplug the video cable(s) from the back of the computer or monitor. The monitor then goes into the self-test mode.

3.Press and hold the and buttons on the front panel, simultaneously for 2 seconds. A gray screen appears.

4.Carefully inspect the screen for abnormalities.

5.Press the button on the front panel again. The color of the screen changes to red.

6.Inspect the display for any abnormalities.

7.Repeat steps 5 and 6 to inspect the display in green, blue, and white colored screens.

The test is complete when the white screen appears. To exit, press the button again.

If you do not detect any screen abnormalities upon using the built-in diagnostic tool, the monitor is functioning properly. Check the video card and computer.

Common Problems

Image 28
Contents Dell E1909W Flat Panel Monitor Users Guide Package Contents About Your MonitorIdentifying Parts and Controls Product FeaturesFront View Back View Front panel controls Front View Label DescriptionMonitor Specifications Flat Panel SpecificationsSide View Bottom ViewPage Page Page Page Appendix Setting Up Your Monitor Setting Up Your Monitor Using the Front Panel Operating the MonitorUsing the On-Screen Display OSD Menu Accessing the Menu SystemUse the Power button to turn the monitor on and off Power With power light indicatorUse this menu to activate Brightness/Contrast adjustment Icon Menu Description SubmenusPreset Mode Input ColorFormat ModeReset Color SettingsReset Display SettingsHorizontal P Osition Vertical Posit IonOSD Warning Messages LCD ConditioningSetting the Optimal Resolution Using the Dell Soundbar OptionalUsing the Tilt VGA/DVI-D inputTilt Setting the display resolution to 1440X900 Optimal Dell E1909W Flat Panel Monitor Setting Up the Monitor Connecting Your MonitorConnecting the white DVI cable Attaching the StandOrganizing Your Cables Connecting the blue VGA cableAttaching the Dell Soundbar Removing the Stand Wall Mounting OptionalBack to Contents Troubleshooting Built-in DiagnosticsCommon Problems Self-TestProduct Specific Problems Common Symptoms What You Experience Possible SolutionsDell Soundbar Problems Specific Symptoms What You Experience Possible Solutions
Related manuals
Manual 2 pages 46.85 Kb

E1909W specifications

The Dell E1909W is a 19-inch widescreen LCD monitor designed to cater to the needs of both everyday users and professionals who seek an efficient computing solution. Launched as part of Dell's E-series lineup, this monitor embodies an array of features and technologies that enhance both productivity and viewing comfort.

One of the standout characteristics of the Dell E1909W is its 1440 x 900 resolution, which offers a crisp display for text and images. This resolution strikes a balance between clarity and responsiveness, making it suitable for a range of tasks from office work to casual multimedia consumption. The widescreen format allows users to work on documents with side-by-side comparisons, enhancing multitasking capabilities.

The monitor is equipped with an 80,000:1 dynamic contrast ratio and a brightness level of 250 nits, contributing to vibrant colors and improved detail in both bright and dark scenes. The Dell E1909W utilizes a fast 5ms response time that minimizes blur during motion sequences, rendering it suitable for basic gaming and video playback without compromising on visual quality.

In terms of connectivity, the Dell E1909W features a VGA input, allowing it to connect seamlessly with most PCs and laptops. While it lacks advanced connectivity options like HDMI or DisplayPort, the VGA interface is sufficient for many traditional setups, keeping costs manageable.

Ergonomically designed, the monitor comes with a tilt adjustment feature, allowing users to customize the viewing angle for optimal comfort. Its slender profile and discreet bezels lend it a modern aesthetic, making it well-suited for various environments, whether in a home office or a corporate setting.

Moreover, the Dell E1909W is designed with energy efficiency in mind. It meets ENERGY STAR guidelines, incorporating features that reduce power consumption without sacrificing performance. This not only contributes to cost savings on electricity bills but also reflects a commitment to environmentally friendly practices.

Finally, the Dell E1909W comes with a standard warranty ensuring peace of mind for users regarding reliability and support. With its blend of functional design and essential features, the Dell E1909W serves as an economical choice for those who need a reliable monitor without unnecessary frills. Overall, it remains a solid option for users prioritizing performance, price, and ease of use.