Dell P2310HF appendix Brightness/ Contrast, Dynamic Contrast, Auto Adjust

Page 19

Brightness/ Contrast

Use this menu to activate Brightness/Contrast adjustment.

Brightness

Brightness adjusts the luminance of the backlight.

Press the button to increase brightness and press the button to decrease brightness (min 0 ~ max 100).

Contrast

Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary.

Press the button to increase contrast and press the button to decrease contrast (min 0 ~ max 100). The Contrast function adjusts the degree of difference between darkness and lightness on the monitor screen.

Dynamic Contrast

Dynamic Contrast adjusts the contrast ratio to 10000:1.

Press the button to select the Dynamic Contrast "On" or "Off".

Auto Adjust

Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use with your particular setup.

Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune your monitor by using the Pixel Clock

(Coarse) and Phase (Fine) controls under Image Settings.

NOTE: In most cases, Auto Adjust produces the best image for your configuration.

NOTE: Auto Adjust option is only available when you are using the analog (VGA) connector.

Image 19

Contents Model P2210Hc/P2310Hc June 2009 Rev. A00 Dell P2210H/P2310H Flat Panel Monitor Users GuideAbout Your Monitor Package ContentsIdentifying Parts and Controls Product FeaturesFront View Label Card View Back ViewSide View Left view Right view Label Description Use Bottom ViewFlat Panel Specifications Monitor SpecificationsPage Page Page Page Page Visit support.dell.com AppendixSetting Up Your Monitor Setting Up Your Monitor Shortcut key Brightness/Contrast Power On the MonitorUsing the Front Panel Operating the MonitorAccessing the Menu System Using the On-Screen Display OSD MenuIcon Menu Submenus Description Contrast Auto AdjustBrightness/ Contrast BrightnessInput Color Auto SourceDisplayPort Color SettinSaturation Reset ColorSettings HueDisplay Settings Other Display Use the Display Settings to adjust image Wide ModePhase ResetLCD Conditioning OSD Warning MessagesVGA/DVI-D/DP input Setting the Maximum ResolutionUsing the Tilt, Swivel, and Vertical Extension Using the Dell Soundbar OptionalTilt, Swivel Vertical Extension Rotating the MonitorAdjusting the Rotation Display Settings of Your System Setting the display resolution to 1920 x1080 maximum Dell P2210H/P2310H Flat Panel Monitor Connecting Your Monitor Setting Up the MonitorAttaching the Stand Page Organizing Your Cables Connecting the USB cableAttaching the Soundbar Optional Wall Mounting Optional Removing the StandBack to Contents Built-in Diagnostics TroubleshootingSelf-Test Common Symptoms What You Experience Possible Solutions Common ProblemsUniversal Serial Bus USB Specific Problems Product Specific ProblemsSpecific Symptoms What You Experience Possible Solutions Dell Soundbar Problems