Dell P2310HF appendix Setting Up the Monitor, Attaching the Stand, Connecting Your Monitor

Page 30

Back to Contents Page

Setting Up the Monitor

Dell™ P2210H/P2310H Flat Panel Monitor User's Guide

Attaching the Stand

Connecting the Monitor

Organizing Your Cables

Attaching the Soundbar (optional)

Removing the Stand

Wall Mounting (Optional)

Attaching the Stand

NOTE: The stand is detached when the monitor is shipped from the factory.

To attach the monitor stand:

1.Remove the cover and place the monitor on it.

2.Fit the two tabs on the upper part of the stand to the groove on the back of the monitor.

3.Press the stand till it snaps into its place.

Connecting Your Monitor

WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions.

To connect your monitor to the computer:

1.Turn off your computer and disconnect the power cable.

Connect the blue (VGA) cable from your monitor to your computer.

NOTE: If your computer supports a white DVI connector, unscrew and detach the blue (VGA) cable from the monitor and then connect the White DVI cable to the monitor and the white DVI connector on your computer.

Image 30

Contents Dell P2210H/P2310H Flat Panel Monitor Users Guide Model P2210Hc/P2310Hc June 2009 Rev. A00Package Contents About Your MonitorProduct Features Identifying Parts and ControlsFront View Back View Label Card ViewSide View Bottom View Left view Right view Label Description UseMonitor Specifications Flat Panel SpecificationsPage Page Page Page Page Appendix Visit support.dell.comSetting Up Your Monitor Setting Up Your Monitor Operating the Monitor Power On the MonitorUsing the Front Panel Shortcut key Brightness/ContrastUsing the On-Screen Display OSD Menu Accessing the Menu SystemIcon Menu Submenus Description Brightness Auto AdjustBrightness/ Contrast ContrastColor Settin Auto SourceDisplayPort Input ColorHue Reset ColorSettings SaturationReset Display Use the Display Settings to adjust image Wide ModePhase Display Settings OtherOSD Warning Messages LCD ConditioningSetting the Maximum Resolution VGA/DVI-D/DP inputUsing the Dell Soundbar Optional Using the Tilt, Swivel, and Vertical ExtensionTilt, Swivel Rotating the Monitor Vertical ExtensionAdjusting the Rotation Display Settings of Your System Setting the display resolution to 1920 x1080 maximum Dell P2210H/P2310H Flat Panel Monitor Setting Up the Monitor Connecting Your MonitorAttaching the Stand Page Connecting the USB cable Organizing Your CablesAttaching the Soundbar Optional Removing the Stand Wall Mounting OptionalBack to Contents Troubleshooting Built-in DiagnosticsSelf-Test Common Problems Common Symptoms What You Experience Possible SolutionsProduct Specific Problems Universal Serial Bus USB Specific ProblemsSpecific Symptoms What You Experience Possible Solutions Dell Soundbar Problems