Left side | Right side |
|
|
Monitor Specifications
Power Management Modes
If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use. This is referred to as Power Save Mode. The monitor automatically resumes functioning when the computer detects input from the keyboard, mouse, or other input devices. The following table shows the power consumption and signaling of this automatic power saving feature:
VESA Modes | Horizontal Sync Vertical Sync Video | Power Indicator Power Consumption | |||
Normal operation (with Dell Soundbar and USB active) | Active | Active | Active | Green | 75 W (maximum) |
Normal operation | Active | Active | Active | Green | 35 W (typical) |
Inactive | Inactive | Blanked | Amber | Less than 2 W | |
Switch off | - | - | - | Off | Less than 1 W |
|
|
|
|
|
|
NOTE: The OSD only functions in the normal operation mode. One of the following messages appears when the “menu” or “plus” buttons are pressed wh
1. Auto Detect (Analog Input) |
| 1. Auto Detect (Digital Input) | |
In Power Save Mode | or | In Power Save Mode | |
Press Computer Power Button | Press Computer Power Button | ||
| |||
or Any Key on Keyboard or Move Mouse |
| or Any Key on Keyboard or Move Mouse | |
|
|
|
2. Analog Input |
| 3. Digital Input | |
In Power Save Mode | or | In Power Save Mode | |
Press Computer Power Button | Press Computer Power Button | ||
| |||
or Any Key on Keyboard or Move Mouse |
| or Any Key on Keyboard or Move Mouse | |
|
|
|
Activate the computer and the monitor to gain access to the OSD.
This monitor is ENERGY
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.
Pin Assignments
15-pin D-Sub connector
The following table shows pin assignments in the
Pin Number Monitor Side of the 15-pin Side Signal Cable
1
2
3
4GND
5
6
7
8
9DDC +5V
10GND