Atlantic Technology 102 SB, 212 SB instruction manual SB Subwoofer Rear Panel, Model 422 SB

Page 4

4

Subwoofer Rear Panel

Model 102, 212 and 422 SB Powered Subwoofer

422 SB Subwoofer Rear Panel

Figure 1

1

2

3

4

Model 422 SB

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR

DOUBLE INSULATION - WHEN SERVICING USE ONLY IDENTICAL REPLACEMENT PARTS

2001310

AC

INPUT

AC INPUT 50 / 60Hz 500W MAX

FOR 115V, USE T5AL 250V FUSE FOR 230V, USE T3.15AL 250V FUSE

ON

AUTO

STANDBY

 

60 Hz

 

 

 

CROSSOVER

 

 

FREQUENCY

40 Hz

140 Hz

 

NORMAL

INVERT

PHASE

NORMAL

BYPASS

CROSSOVER

RIGHT

L / MONO

 

 

 

OUTPUT

 

 

INPUT

CAUTION:

FOR CONTINUED PROTECTION AGAINST FIRE

REPLACE ONLY WITH SAME TYPE 250V FUSE

5

6

7

8

9

10

11

1Product Serial Number

Write this number in the space provided on page 2 for future reference.

2On/Off Switch

Use this switch to turn the amplifier completely on or off.

3AC Input

Use the included power cord to connect your amplifier to a wall outlet. (pages 5 and 6)

4Standby Switch

When in ON position,the amplifier will always be on.When in the AUTO position, the amplifier will be in Automatic Standby Mode. (pages 5 and 9)

5Voltage Select Switch

Voltage switch for use in different countries.This switch will be set when you receive the unit. Change this setting only when you are sure your application requires it. For US, the switch should be set to the 110-120V position.

6Crossover Control

An adjustable (40Hz to 140Hz) @ 18dB per octave low-pass cross- over. (pages 5 and 9)

7Phase Switch

This switch allows precise acoustic matching with satellite speaker systems whose output may be phase reversed. (pages 5 and 10)

8Crossover Switch

When in the NORMAL position, adjustment of the crossover can be made by the LowPass Control.If being fed a pre-filtered or THX signal, place the switch at the BYPASS position. (pages 5 and 9)

9Low Level Output

The outputs allow daisy chaining of multiple subwoofers, or as a return path back to the processor. (pages 5 and 6)

10Low Level Input

Use the input to connect to the subwoofer or LFE line out from your processor/receiver. (pages 5 and 6)

11Front Mounted Variable Level Control and Status LED

Shown in greater detail on page 9

Image 4
Contents Model 102 SB Model 212 SB Model 422 SB Safety Precautions For Future ReferencePhase Switch 212 SB Subwoofer Rear PanelSB Subwoofer Rear Panel Model 422 SBFeatures Two low level inputs, two low level outputsModel 102, 212 and 422 SB Powered Subwoofer Low Level Connections with One Subout/LFE Output Low Level Connections with Two Subout/LFE Outputs Placement and Operation System Set UpDual Subwoofer Placement Care of Your SubwooferSubwoofer Troubleshooting Guide Specifications015-0442-A