Dell SE198WFP appendix Resolution, Video Supported Modes, Preset Display Modes, Electrical

Resolution

Horizontal scan range

Vertical scan range Optimal preset resolution Highest preset resolution

30 kHz to 83 kHz (automatic)

56 Hz to 75 Hz (automatic)

1440 x 900 at 60 Hz

1440 x 900 at 75 Hz

Video Supported Modes

Video display capabilities (DVI playback) 480i/480p/576i/576p/720p/1080i/1080p (Supports HDCP)

Preset Display Modes

The following table lists the preset modes for which Dell guarantees image size and centering:

Display Mode

VESA, 720 x 400

VESA, 640 x 480

VESA, 640 x 480

VESA, 800 x 600

VESA, 800 x 600

VESA, 1024 x 768

VESA, 1024 x 768

VESA, 1152 x 864

VESA, 1280 x 1024

VESA, 1280 x 1024

VESA, 1440 x 900

Horizontal Frequency (kHz)	Vertical Frequency (Hz)	Pixel Clock
		(MHz)
31.5	70.0	28.3
31.5	60.0	25.2
37.5	75.0	31.5
37.9	60.3	49.5
46.9	75.0	49.5
48.4	60.0	65.0
60.0	75.0	78.8
67.5	75.0	108
64.0	60.0	135.0
80.0	75.0	135.0
55.9	60.0	106.5

Sync Polarity

(Horizontal/Vertical)

-/+ -/- -/- +/+ +/+ -/- +/+ +/+ +/+ +/+ -/+

Electrical

The following table lists the monitor electrical feature:

Video input signals

Synchronization input signals

AC input voltage / frequency / current

Inrush current

Analog RGB, 0.7 Volts +/-5%, positive polarity at 75 ohm input impedance

Digital DVI-D TMDS, 600mV for each differential line, positive polarity at 50 ohm input impedance

Separate horizontal and vertical synchronizations, polarity-free TTL level, SOG (Composite SYNC on green)

100 to 240 VAC / 50 or 60 Hz + 3 Hz / 2.0A (Max.)

120V:30A (Max.) 240V:60A (Max.)

Physical Characteristics

The following table lists the monitor physical characteristics:

Connector type	15-pin D-subminiature, blue connector; DVI-D, white connector
	Digital: Detachable, DVI-D, Solid pins, shipped detached from the monitor
Signal cable type
	Analog: Detachable, D-Sub, 15pins, shipped attached to the monitor
Dimensions (with stand)
Height	14.42 inches (366.21 mm)
Width	17.59 inches (446.72 mm)