Dell SE198WFP appendix Power Management Modes, Pin Assignments

Power Management Modes

If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use. Th referred to as Power Save Mode. The monitor automatically resumes functioning when the system detects input from the keyboard, mouse or other input device following table shows the power consumption and signaling of this automatic power saving feature:

VESA Modes

Normal operation (with Dell Soundbar active)

Normal operation

Active-off mode

Switch off

Horizontal Sync

Active

Active

Inactive

-

Vertical Sync

Active

Active

Inactive

-

Video	Power Indicator	Power Consumption
Active	Blue	75 W (maximum)
Active	Blue	32 W (typical)
Blanked	Amber	Less than 2 W
-	Off	Less than 1 W

NOTE: The OSD only functions in the normal operation mode. One of the following messages appears when the Menu or Plus buttons are pressed when i Active-off mode.

1 : Auto Detect (Analog Input)		1 : Auto Detect (Digital Input)
In Power Save Mode		In Power Save Mode
Press computer power button	or	Press computer power button
or any key on keyboard or move mouse		or any key on keyboard or move mouse
2: Analog Input		3: Digital Input
In Power Save Mode		In Power Save Mode
Press computer power button	or	Press computer power button
or any key on keyboard or move mouse		or any key on keyboard or move mouse

Activate the computer and the monitor to gain access to the OSD.

This monitor is ENERGY STAR®-compliant as well as TCO '99 power management compatible.

* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.

Pin Assignments

15-pin D-Sub connector

Pin Number Monitor Side of the 15-pin Side Signal Cable

1 Video-Red

2 Video-Green

3 Video-Blue

4 GND

5 Self-test

6 GND-R

7 GND-G

8 GND-B

9 DDC +5V