![](/images/new-backgrounds/1180237/18023747x1.webp)
Back to Contents Page
Setting Up the Monitor
Dell™
Attaching the Base
Connecting the Monitor
Attaching the Soundbar (optional)
Removing the Stand
Attaching the Base
NOTE: The base is detached when the monitor is shipped from the factory.
After placing the monitor panel on soft cloth or cushion, complete the following steps to attach the base.
1.Place the monitor on a stable flat table.
2.Fit the groove on the base onto the riser of the monitor.
3.Push the hook to lock the stand base.
Connecting Your Monitor
CAUTION: Before you begin any of the procedures in this section, follow the Safety Instructions.
Connecting the blue VGA cable
CAUTION: The Graphics are used for the purpose of illustration only. Appearance of the computer may vary.