selected on the Main Source bus is automatically selected. If A+V is not engaged, the input source is user selectable. Level controls for each input source are the rotary pots below the selection buttons.
5.A+V: Audio follow video switch. When this button is engaged (you’ll know it is engaged because the LED is lit), the audio associated with a selected input source automatically follows the video through the dissolve. When the button is inactive, audio
must be switched manually.
6.Color Processor: These controls become active in conjunction with the Input Format selector (3.). When that control is active, you can make adjustments to the selected channel’s brightness, contrast, color, and tint (NTSC only) by pressing the up and down arrow buttons. The LEDs on the left side of this section indicate relative steps above or below unity (the signal exits the control unchanged). Press and hold the Reset button in the upper right for 2 seconds or more to reset the Color Processor controls
all to unity. The “Reset All” button resets the color correction and RGB correction settings for all 4 inputs.
9