Faq

1.Q: When I select BACKGROUND, the “ON” button starts

blinking. Sometimes it will speed up, but sometimes it will slow down. Is it normal?

A:Yes, it’s normal, and it will not affect the performance.

2.Q: When I use GPI control, occasionally the “PLAY” key will turn on in SE-800 switcher. Why the remote interface doesn’t turn on?

A:It’s normal. Don’t need to worry.

3.Q: While programming the function keys is in process, three seconds after I pressed “ENT” key, the remote interface will display number “555”. Is that normal?

A:We already notice this problem, and will fix it in next version software.

4.Q: Are all SE-800 can be controlled by RMC-120?

A:No. RMC-120 can only use with SE-800 ROM A: v5.6; ROM B: v2.4, or later version firmware.

5.Q: How do I check my SE-800 firmware version?

A:For the ROM A, when SE-800 turns on, please check the digital number which shows on “EFFECT” and “SPEED” if it’s showing 5.6 as below.

EFFECT SPEED

0 5 6