Accessories
For long distance transmission up to 200 meters, you could use Datavideo DV cables and DV Repeaters. With Datavideo DV converter DAC6, you could convert DV25 digital video signal to analog video signal (Component, Y/C, and Composite) for monitoring DV25 video in your existing monitor.
DAC-6 DV to Analog one way converter
Power Requirements
DC12V/10W
Video I/O
Output x 1 — Analog Y/C, Composite, Component
Input x 1 — 6 pin IEEE1394 interface, 25Mbps bit rate
Bypass x 1 — 6 pin IEEE1394 interface, 25Mbps bit rate
Audio I/O
1 x Stereo Out
DV Audio — 48K/32KHz two channels locked
DIP Switch Functions
NTSC/PAL Support
Video Setup 0 or 7.5 IRE
Auto/Manual Signal Detection
Locked & unlocked Audio
Monitor mode On/Off (Mainly for NLE use)
10, 20, 40 meter DV cable (1066, 2066,
and 4066)
DV Repeater (VP-314)
11