7.PPT100 should be successfully installed into the computer. The program will ask you to restart the computer now or restart it later, make your choice, and then click on “Finish”.
8. Now you can use the PPT100 software.
Note 1: There will be a semitransparent “DataVideoCG and PPT100” logo on the TV screen if you did not activate and register the software. This logo will always be on if a demo version is being used. The logo will not be present when you have activated the software.
The Performance of Screen Capture
The performance issue is critical because PPT100 consumes a lot of CPU resource while executing screen conversion. PPT100 will not run well with other heavy loading software at the same time.
After testing different kinds of graphic cards, the Intel Graphics Media Accelerator 900 chip is outstanding at providing the best performance for PPT100.
However, 3D animation games, video encoding/decoding software and any software that needs to process complicated animations or moving pictures will certainly drag down the performance of PPT100.
Capture Rate
Users can inspect the capture rate on the dialog. Please see the average rate using Intel 915G chipset motherboard for your reference.
Resolution | Frame per Second | |
800x600 | 12 | frames per sec. |
1024x768 | 6.5 | frames per sec. |
1280x1024 | 5 | frames per sec. |
Note: “Full Screen Capturing” is faster than “Partial Screen Capturing”.
6