Datamax 7A300007 Rev. 2 manual Horizontal Position, Carriage ReturnCR, Backspace, Horizontal Tab

Horizontal Position

Carriage ReturnCR

This command prints the input buffer information and advances the paper to the next line. If the printer buffer is empty a line is advanced.

Control Code:	CR
Hexadecimal:	0D
Decimal	13

Backspace	BS
This command removes the previous character from the print buffer.
Control Code:	BS
Hexadecimal:	08
Decimal:	8
Horizontal Tab	HT

This command advances the cursor by the number of dots specified in the Horizontal Margins command

Control Code: HT

Hexadecimal: 09

Decimal: 9

Set Horizontal Tab Width ESC T H n

This command sets the Horizontal Tab (HT) value. The parameter n has values between 0 and 255 with a default value of 100 dots..

Example: The following escape sequence sets the horizontal tab width to 50 dots.

Escape Sequence:	ESC	T	H	2
Hexadecimal:	1B	54	48	32
Decimal:	27	84	72	50

8