Important Regulatory and Safety Notices

Important Regulatory and Safety Notices

Before using this product and any associated equipment, refer to the “Important Safety Instructions” listed below so as to avoid personnel injury and to prevent product damage.

Products may require specific equipment, and /or installation procedures be carried out to satisfy certain regulatory compliance requirements. Notices have been included in this publication to call attention to these specific requirements.

Symbol Meanings

This symbol on the equipment refers you to important operating and maintenance (servicing) instructions within the Product Manual Documentation. Failure to heed this information may present a major risk of damage or injury to persons or equipment.

The symbol with the word “Warning” within the equipment manual indicates a potentially hazardous situation, which if not avoided, could result in death or serious injury.

Warning

The symbol with the word “Caution” within the equipment manual indicates a potentially hazardous situation, which if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.

Caution

The symbol with the word “Notice” within the equipment manual indicates a situation, which if not avoided, may result in major or minor equipment damage or a situation which could place the equipment in a non-compliant operating state.

Notice

This symbol is used to alert the user that an electrical or electronic device or assembly is susceptible to damage from an ESD event.

ESD

Susceptibility

Important Safety Instructions

Caution

Warning

This product is intended to be a component product of the openGear frame. Refer to the openGear frame Owner’s Manual for important safety instructions regarding the proper installation and safe operation of the frame as well as it’s component products.

Certain parts of this equipment namely the power supply area still present a safety hazard, with the power switch in the OFF position. To avoid electrical shock, disconnect all A/C power cords from the chassis' rear appliance connectors before servicing this area.

Service barriers within this product are intended to protect the operator and service personnel from hazardous voltages. For continued safety, replace all barriers after any servicing.

Warning This product contains safety critical parts, which if incorrectly replaced may present a risk of fire or electrical shock. Components contained within the product’s power supplies and power supply area, are not intended to be customer serviced and should be returned to the factory for repair.

To reduce the risk of fire, replacement fuses must be the same type and rating. Only use attachments/accessories specified by the manufacturer.

9301 User Manual • (V 2.1)

Page 3 of 24

9301 specifications

Cobalt Networks 9301 is a sophisticated and versatile network appliance designed to meet the demands of modern data centers and enterprise environments. Known for its robust features and reliable performance, the Cobalt 9301 stands out in a crowded field of networking solutions. This unit excels in delivering seamless connectivity, optimized throughput, and enhanced security, making it a popular choice for organizations looking to bolster their infrastructure.

One of the primary features of the Cobalt 9301 is its high-speed data processing capabilities. Equipped with advanced multi-core processors, the device can efficiently handle large volumes of data traffic, ensuring minimal latency even during peak usage hours. This performance is crucial for businesses that rely on real-time data transmission, such as financial institutions and e-commerce platforms.

The Cobalt 9301 supports a wide range of connectivity options. It features multiple Ethernet ports, allowing for flexible deployment in various network configurations. These ports support various standards, including Gigabit and 10 Gigabit Ethernet, enabling organizations to choose the appropriate bandwidth for their needs. Additionally, the appliance is designed to be compatible with both IPv4 and IPv6, ensuring future-proofing as networks evolve.

Another key characteristic of the Cobalt 9301 is its security features. In an era where data breaches are a significant concern, the device incorporates advanced encryption protocols and firewall capabilities. These security measures protect sensitive data from unauthorized access and ensure compliance with industry regulations. Moreover, the unit includes robust monitoring tools that enable administrators to track network activity and identify potential threats in real time.

The Cobalt 9301 also boasts ease of management through its intuitive user interface. Network administrators can quickly configure, monitor, and troubleshoot the device, significantly reducing the time needed for maintenance and support. With its centralized management options, users can handle multiple devices from a single console, streamlining operations and improving efficiency.

Finally, the Cobalt 9301 is designed with scalability in mind. Whether a business is growing rapidly or requires the flexibility to adjust to fluctuating workloads, this appliance can scale to accommodate changing demands. Organizations can implement additional modules or upgrade existing components without significant downtime, making it a cost-effective solution for evolving network environments.

In conclusion, the Cobalt Networks 9301 is a powerful networking appliance that combines speed, security, and scalability. With its robust feature set and cutting-edge technologies, it is well-suited for organizations aiming to enhance their network performance and infrastructure resilience.