Citizen iDP3310 manual IDP-562

			iDP3310 User's Manual
10.3.2 Details
LF			ALL
[Function]	Line Feed
[Code]	<0A>H
[Outline]	This command prints the data in the print buffer and feeds the paper by one line.
	If printing is completed, the command will move a printing position to the left margin and
	clear the print buffer. This is a standard command to print one line of the text.
[Caution]	In other than the P-250 mode and P-900R mode, this command will be ignored immediately
	after one-line buffer-full printing. In the P-250 mode and P-900R mode, printing will not be
	performed until this command is received.
[See Also]	ESC a, ESC b, CR
CR			iDP-562
[Function]	Print
[Code]	<0D>H
[Outline]	1.	When the DSW1-5 are set to ON	; This command is ignore
	2.	When the DSW1-5 are set to OFF	; If there is some data in the print buffer, the
		command will print the data and feed the line. If not, it will feed the line.
[Caution]	This command is ignored immediately after one-line buffer-full printing.
	This command is also ignored in the P-200 mode, P-250 mode, and P-900R mode.
[See Also]	ESC a, ESC b, LF

37 CITIZEN