| iDP3310 User's Manual |
ESC Y | ALL |
[Function] | Specify Repeat Print |
[Code] | <1B>H<59>H |
[Outline] | If this command is executed, the contents of the buffer will be printed according to the repeat |
| print mode set with the DIP switches. The buffer is cleared after reprinting. |
| ∙ Repeat print mode |
| If the command is received after printing, the data will be reprinted. |
| ∙ Command/switch repeat print mode 2 |
| If the command is received, the data will all be printed, and 2 seconds later, it will be |
| reprinted. If this command is not received, the data will not be reprinted. |
| ∙ Command/switch repeat print mode 1 |
| If the command is received, the data will all be printed, and 10 seconds later, it will be |
| reprinted. If this command is not received, the data will not be reprinted. |
[Caution] | If the data exceeds 1KB, this command will reprint the preceding 1KB data. |
| If this command is not received during printing, it will be ignored. This command is ignored |
| in the normal print mode |
| DC3 (<13>H) command assumes the same operation. |
[See Also] | Pages 20, 5.3 Repeat Print Setting |
50 | CITIZEN |