Atlantic Technology 162 PBM instruction manual Voltage Selection, High Level

Model 162 PBM High Performance Subwoofer				tlantic
				ATECHNOLOGY
Example 3:
Speaker Out/	Left Front Speaker		Receiver/Amplifier	Right Front Speaker
High Level In
This is the most			Main Speakers
common method
for connecting a		Left	Right
subwoofer to a
system without a
dedicated sub-
woofer line out or
Preamp outputs.

LO-LEVEL
INPUT
IN	THRU
L/MONO
HI-LEVEL	THRU
INPUT
RIGHT

Sub Woofer

It is important to observe polarity while making speaker connections: red (+) terminals on the amplifier to red (+) on the speaker, black (-) on the amplifier to black (-) on the speaker. Look carefully at the wires you are using and note that one of the wires in each pair is marked by either a different color, printing, ridges, or a thread intertwined with the wire strands. By convention, the marked wire is connected to the red (+) terminal.

Voltage Selection

Figure 2: The fuse is located next to the IEC AC socket

Insert screwdriver tip here

The Atlantic Technology subwoofers operate with either 120 or 240 volts AC 50-60 Hz. Please make sure that the voltage selector switch shows the correct voltage for your

area before plugging the unit in. The voltage can be easily changed by moving the switch to the correct

voltage in your area and installing the proper fuse and

power cord. To change the fuse, remove the power

cord, insert a screwdriver tip into the notch in the side

of the fuseholder, and pry the fuse out. Replace with the correct value fuse as marked next to the fuseholder, and push back into place.

6