General Specifications, Feature Parameters

2. GENERAL SPECIFICATIONS

Feature	Parameters
Printing system	Direct thermal printing
Printing speed	50 mm/sec
Printing head	Total dots: 384
	Dot density: 8 dots/mm
	Printing width: 48 mm
Emulation	ESC/POS commands plus extra commands for specific
	printer features
Characters	ASCII Code, Alphanumeric characters,
	International characters, Windows Code page
Characters per line	FONT A: 32 characters/line, FONT B: 42 characters/line
Dot matrix	FONT A: 12H ⋅ 24V, FONT B: 19H ⋅ 16V
Bar code type	UPC-A/E, JAN(EAN)13/8 columns, ITF,
	CODE39, CODE128, CODABAR, CODE93
Paper feed system	Friction feed
Paper width	58 ±0.5 mm
Paper thickness	60 - 65 ∝m
Recommended paper	TF50-KS-E2D (Nippon Paper)
Paper roll maximum diameter	40 mm (CMP-10-⋅4), 50 mm (CMP-10-⋅5)
Minimum core diameter	8 mm
Interfaces	IrDA version 1.0
	Serial interface (by serial cable - option)
IrDA Interface	Mode: Infrared transceiver mode
	Transport wave: Wave length - 850 to 900 nm
	Communication speed: 9600, 19200, 38400, 57600,
	115200 bps
	Data length: 8 bits
	Start bit: 1 bit
	Stop bit: 1 bit
	Parity: none
	Communication: Half duplex
	Flow control: IrDA standard
	Communication distance: Max. 80 cm

— 12 —