5.Returning to the memory switch select mode
When the setting of the desired content is completed, open the paper cover and then close the paper cover. This allows the printer to print the setting of the changed memory switch.
6.Saving the setting and exiting the memory switch setting mode
Press the FEED switch short to move to “Write/Factory Setting”. Then press and hold the FEED switch. The printer prints the content of new setting and exits the memory switch setting mode to return to the normal standby state.
*Unless saving the setting is executed, the changed setting cannot be enabled.
7.Initializing the memory switch
When you want to return the memory switch setting to the initial state, go to “Write/Factory Setting” in the above procedure. Here, open the paper cover and press and hold the FEED switch. This allows the printer to return to the initial state.
*All the memory switch settings are returned to the factory set values.
— 48 —