Citizen Systems CBM-231 manual Dot single density 67 DPI

CBM-230/231 User’s Manual

(8) Specifying the bit Image (ESC * m n1 n2 D1 ~ Dn)

Code : [1B]h + [2A]h + m + n1 + n2 + Dn

*{m= Bit image mode (refer to the table below)} {0 ≤ n1 ≤ FF}

{0 ≤ n2 ≤ 02}

The data is described with the hexadecimal code.

Prints the data in the form of bit image in accodance with the bit image mode specified by "m".

•The number of bit printed is divided by 256, and n2 and is assumed to be a quotient, and n1 to be the remainder.

•The total number of dots printed in the form of bit image is n1 + (256 ⋅ n2).

•When the bit image is entered beyond a 1 dot line (576 dots) position, the surplus data is discarded.

•For the bit image data (Dn), the bit to be printed is set to "1" and that not to be printed to "0".

•The following table shows the bit image mode.

( ) = For 42 columns spec.

m(Hex)	Mode	Vertical		Horizontal
		No.of Dots	Dot Density	Dot Density	Max. No. of Dots
0	8-dot single density	8	67 DPI	101 DPI	288 (252)
1	8-dot double density	8	67 DPI	203 DPI	576 (504)
20	24-dot single density	24	203 DPI	101 DPI	288 (252)
21	24-dot double density	24	203 DPI	203 DPI	576 (504)

•When the value set for "m (bit image mode)" dose not meet the condition, the data subsequent to n1 is processed as printing data.

33 CITIZEN