Citizen Systems CBM-231 manual Citizen

Page 41

CBM-230/231 User’s Manual

(13) Setting the horizontal tab position (ESC D n NUL)

Code : [1B]h + [44]h + n [00]h

* {0 n FF} The data is described with the hexadecimal code.

Sets the horizontal tab position.

"n" denotes the number of columns from the beginning to the horizontal tab position. At this time, "n" is the setting position minus 1.

The tab position is set in the position of the character width n from the beginning of the line. The character width at this time includes the right space amount of the character and is doubled when double width magnification is specified.

Up to 32 tab positions can be set. Setting of the tab positions beyond this limit is ignored.

ESC D NUL clears all of set tab positions. After clraring, HT is ignored

(14)Setting the horizontal tab position (ESC D n NUL)

Code : [1B]h + [44]h + n [00]h

* {0 n FF} The data is described with the hexadecimal code.

Sets the horizontal tab position.

Only the lowest bit(n0) is effective for "n".

The following table lists the controls by the lowest bit (n0).

n0

Type

0Canceling highlighting.

1Specifying highlighting.

Effective for all characters.

A highlighted character has one dot each added in the horiz ontal direction.

36

CITIZEN

Image 41
Contents Line Thermal Printer Model CBM -230/231 Declaration of Conformity Important Safety Instructions Contents 10.1 General Description FeaturesPrecautions for Installation Model Classification Basic SpecificationsCode 39, Code 128, Codabar Specifications ListPrinting Position Head and Cutter Positional Relations Specifications for Printing Paper Specified PaperAppearance and Component Parts Operation Connecting the Interface CableConnecting the Drawer Kick Connector CBM-231 Inserting the Paper RollCitizen Citizen Citizen Operation Panel Opening the Auto CutterCBM-231 Setting of DIP Switches OFF Parallel Interface SpecificationsConnectors Pin Configuration Data Input / Output Signals 6.3.1 Input / Output SignalsElectrical Characteristics Buffering Timing ChartSerial Interface DTR Input / Output Signals 7.3.1 Input / Output Signals Error Detection Data ConfigurationData Receiving Control RS-232C circuit Input RD, DSR Output DTR, TD Drive Circuit Drawer Kick ConnectorPrint Control Function Control Codes ListInput Data Format Font B Citizen Example CBM-230/231 User’s Manual For the Font B Dot single density 67 DPI Citizen Type Citizen Citizen Citizen LF switch enabled LF switch disabled Initial value of n is Data is described with the hexadecimal code Citizen Citizen When inverted printing Paper feed direction Is cancelled Citizen UPC-A Citizen Citizen 203 DPI Macro execution mode Citizen Citizen International Character Code TableInternational Character Code Table Precautions for Handling the Thermal Paper Precaution for Handling the Printer MechanismOther Precautions Eliminating the Jammed PaperEliminating the Paper Powder Cleaning the HeadAppendix 2. External Dimensions CBM-231 Appendix 3. Block Diagram Information Systems Division Head Office