1. HANDLING AND MAINTENANCE OF PRINTER
See the Instruction Manual coming with the printer body.
2. SPECIFICATIONS
2.1 Basic Specifications
Item |
|
| ||||
Printing Method | Dot matrix |
|
|
|
| |
Printing Direction | Unidirectional printing (Erect/inverted characters) |
| ||||
Character Configuration | (5+1)´8 |
|
|
| (4+0.5)´8 |
|
Number of Digits | 24 digits: 144 dots/line |
| 40 digits: 180 dots/line |
| ||
Printing Speed | Approx. 2.5 lines/sec. |
| Approx. 1.8 lines/sec. |
| ||
Character Size | 1.62´2.4mm |
|
| 1.08´2.4mm |
| |
Line Spacing | 3.52mm |
|
|
|
|
|
Printing Paper | Rolled paper: 57.5 +/- 0.5(W) x 50(D) mm |
| ||||
Core inner diameter: 12 +/- 1 mm |
| |||||
|
| |||||
|
| |||||
Interface | Serial | |||||
Input Buffer | 2 KB |
|
|
|
|
|
Paper Near End Detection | Stops a data input as the printing paper is running out. | Prints | ||||
the data in the buffer and stops. |
| |||||
|
| |||||
|
|
| ||||
Paper End Detection | Stops printing when the printing paper has run out. |
| ||||
Auto Loading | If new | paper | is set | into the paper inlet, it will | be fed | |
automatically. |
|
|
|
| ||
|
|
|
|
| ||
|
| |||||
| Capable of setting one out of 8 countries with the DIP switch. | |||||
International Character Code | (Japanese, U.S., French, German, British, Italian, Spanish, | |||||
Danish) | Capable of | setting one of the above plus another | ||||
| one(Swedish) by setting a command. |
| ||||
Ink Ribbon | Purple |
|
|
|
|
|
Supply Voltage | 5 V DC +/- 5 % (Voltage at print) Approx. 2.5 A, Approx. 4 A at | |||||
peak(10 % duty) | Use the external power source |
| ||||
|
| |||||
|
|
| ||||
Mean Power Consumption | When printing: Approx. 7 VA |
| ||||
When not printing: Approx. 0.7 VA |
| |||||
|
| |||||
|
|
| ||||
Weight | Approx. 500 g (Fittings included) |
| ||||
Outer Dimensions | 115(W)´65(H)´119(D)mm |
| ||||
Mounting Hole Dimensions | 109(W)´62(H) | +0 |
|
|
| |
| ||||||
|
|
|
| |||
Operating Temperature | 0 to 40°C |
|
|
|
| |
Storage Temperature |
|
|
|
|
- 4 - | CITIZEN |