Shortly, you will see the Ethernet LED blinking; this indicates that there is data traffic going through the PG902. You are now ready to start using your network.
How to use a power strip with the PG902
If you are planning to use a power strip we recommend that you plug the power strip in to the Powerline and not the Powerline into the power strip. If you must plug your adapter into a power strip, we suggest you use a basic power strip as the more advanced ones have a filter that can interfere with the Powerline signal.
AP/STBY
ETHERNET
STATUS
CONFIG
RESET
ON
STBY Powerline Ethernet
Adapter with Filter
AP/STBY
ETHERNET
STATUS
CONFIG
RESET
ON
STBY Powerline Ethernet
Adapter with Filte r
260072- |
| 021_PG902_User_Guide(UK_A6 6 |
|
|
|
|
|
|
|
|
| ||
|
|
|
|
| ||
|
|
| 2008/8/6 �� 10:44:49 | |||