BT 902 manual On your AP adapter Step

Page 9

Step 3: On your AP adapter (Step 1),

ETHERNET

press the CONFIG/RESET button until

the AP LED starts blinking.

AP/STBY

STATUS

CONFIG

RESET

ON

STBY Powerline Ethernet

Adapter with Filter

AP/STBY
ETHERNET
STATUS								Step 4: On the NEW EP adapter you
RESET								Step 4: On the NEW EP adapter you
CONFIG								are adding to your network (step 2),
								are adding to your network (step 2),
			Adapter with Filter					press the CONFIG/RESET button
ON
STBY Powerline Ethernet								until the AP LED starts flashing. The
								until the AP LED starts flashing. The
								NEW EP adapter AP LED will flash 3
								times and the STATUS LED will turn
								ON.
								ON.
								Wait until the AP LED on the AP
								adapter (step 1) stops blinking.

You have now added your NEW EP adapter to your network.

Repeat the same steps for each new adapter you want to add to your network.

260072-		021_PG902_User_Guide(UK_A8 8


					2008/8/6 �� 10:44:50

Image 9

Contents Quick User Guide Introduction Table of ContentsPackage content Perfect complement for a Wi-Fi connectionLEDs and Buttons Functions How to install the PowerGrid How to use a power strip with the PG902 Reset the new Adapter to its How to add a new Powerline to your existing networkOn your AP adapter Step Frequently Asked Questions How to understand the Status LED coloursHow do I convert an AP into an EP? How do I convert an EP into an AP?Why is there more than one AP on the network? Why is Sdtv video not streaming?What if the house next door has Powerline Adapters as well? Why is Hdtv video not streaming?260072 021PG902UserGuideUKA12 Product disposal instructions for residential users Product disposal instructionsProduct disposal instructions for business users CopyrightEC declaration of conform PowerGrid902 Quick User Guide for UK A1.1 260072-021