Troubleshooting
Problem No power
No sound
Solution
1.Check if batteries are installed properly
2.Batteries may be low. Replace with new batteries*
3.Press power button 
on the Waterproof Sound Case and iPod
1.Check if the 3.5mm mini jack is plugged into iPod
2.Check volume by pressing 
volume button
3.Check volume on iPod and adjust volume
4.Check if the power is on 
on the Waterproof Sound Case and iPod
5.Batteries may be low. Replace with new batteries*
iPod doesn't fit in case
1.Check if the correct iPod spacer is used for your iPod (See page 2)
2.Make sure the 3.5mm mini jack and cord is not blocking the iPod
3.Clear iPod compartment of any debris
4.Make sure
Waterproof Sound | 1. | Use iPod Settings on page 8 |
Case emits noises, | 2. | Replace with new batteries. |
or distorted sounds |
|
|
* see Battery & Safety Rules on page 12 under Care and Maintenance.
If problems still persists, call the EGO helpline at (562)
9