P4M800
CHAPTER 3: HEADERS & JUMPERS SETUP
3.1HOW TO SETUP JUMPERS
The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”.
Pin opened | Pin closed |
3.2DETAIL SETTINGS
JUSBV1/JUSBV2: Power Source Headers for USB ports
Pin 1-2 Close:
JUSBV1: +5V for USB ports at JUSB1 and JUSBLAN1.
JUSBV2: +5V for USB ports at front panel (JUSB2/JUSB3).
Pin 2-3 Close:
JUSBV1: USB ports at JUSB1 and JUSBLAN1 are powered by +5V standby voltage.
JUSBV2: USB ports at front panel (JUSB2/JUSB3) are powered by +5V standby voltage.
|
| 3 |
|
|
| 1 | 3 |
|
| 1 |
|
JUSBV1 | Pin | ||
| 3 | ||
| 1 |
|
|
|
| 3 |
|
|
| 1 | 3 |
JUSBV2 | 1 |
| |
1 | 3 | Pin |
|
Note: |
|
|
|
In order to support this function
12