Installing the Software
DOS Packet Driver Installation
The installation of this driver includes creating or editing a configuration file (AWCPKT.INI). It is required that this file contain the following lines:
Table 3.3 - Minimum AWCPKT.INI Driver Settings
Infrastructure Mode
Ad Hoc Mode
[AWCPKT] | [AWCPKT] |
|
|
If INFRASTRUCTURE is omit- | INFRASTRUCTURE = “NO” |
ted the default will be “ON” |
|
|
|
SSID = “your_SSID_here” | SSID = “your_SSID_here” |
|
|
| CHANNEL = <channel> |
|
|
Additional variables defined in the following section may also be used.
The Wireless LAN Adapter can be installed in a DOS environment using DOS IP stack products such as FTP software.
1.Power on your computer.
2.Copy the \PKT\AWCP45C.COM file from the Aironet Device Driver diskette to the directory containing the network files.
3.Copy the AWCPKT.INI file from the Aironet Device Driver diskette to the directory containing the Packet driver.