Banner American Products Wireless Network manual Click Start Settings Control Panel

Supplemental Information

SureCross™ DX80 Wireless Devices - Changing IP Address in Windows 95, 98 & ME

Overview: To use Ethernet communication with the DX80 Gateway Pro, configure the IP address of your computer.

Default IP Address:

192.168.0.1

Typical IP Address:

192.168.0.2

Procedure:1To change the IP address of a Windows 95, 98,2or ME computer, do the following:

• Double-click the Network icon

3• Click Start > Settings > Control Panel

•Scroll down the components list

•Click on your Network Card after TCP/IP

•Click on Properties

NOTE: There may be more than one TCP/IP component on the list, so choose one that is similar to the description of your Network Card.

4

• Click the IP Address tab

• Write down the existing address of your PC before changing it:
•		.	.	.
	Choose Specify an IP Address

•Change the IP Address to 192.168.0.2

•Change the Subnet Mask to 255.255.255.0

•Click OK

•Reboot the PC

©2007 Banner Engineering Corp. • 9714 Tenth Avenue North • Minneapolis, MN 55441 USA

763.544.3164 • Fax 763.544.3213 • Toll Free 1.888.3.SENSOR (1.888.373.6767) • www.bannerengineering.com/training

Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com