Aspen Touch Solutions ATM-173R OSD Menu and Function, Contrast and Brightness, OSD Tool, Auto DIM

Page 7

The complete menu of the OSD is shown in the table below. The Main Menu icon for each menu is shaded, and the individual functions within the group follow:

OSD Menu and Function

Contrast and Brightness

Contrast

Controls the display contrast

Brightness

Controls the display brightness

Video Adjustment

 

Auto Adjust

Automatically sets display image size, position, and fine adjustment.

 

Contrast and brightness are not adjusted.

Left/Right

Controls horizontal position

Up/Down

Controls vertical position

Horizontal Size

Increases or decreases the horizontal size of the image

Fine

Controls the vertical fine adjustment. May improve picture detail in emulation modes.

OSD Tool

 

OSD Left/Right

Adjusts the default horizontal position of the OSD on the display

OSD Up/Down

Adjusts the default vertical position of the OSD on the display

OSD Timeout

Determines time (in seconds) that OSD waits before closing automatically after no

 

action has been performed

Factory Reset

Recalls original factory settings of image parameters

OSD Language

Selects the OSD menu language—English, French, German, Italian, Spanish,

 

Japanese, Traditional Chinese, Simplified Chinese

OSD Color

Selects one of ten OSD color schemes

Color Adjustment

Adjusts preset color temperature of the image. Available choices are 9300, 7500,

 

6500, and 5500° Kelvin (K). A User mode allows custom setup of each color

 

component of the image—Red, Green and Blue. Default setup for this parameter is

 

6500°K. Do not adjust color temperature unless you have a specific need to do so.

Audio Adjustment

 

Volume

Adjusts the loudspeaker volume

Mute ON/OFF

Mute ON turns off the audio function. Mute OFF restores the audio function

Auto DIM

 

Auto Dim

Turns the Auto-Sensing Brightness Adjustment circuit ON or OFF

Dimming Range

Menu shows sensed light level, and brightness setting as a percentage of full scale

 

(same setting as Brightness in Contrast and Brightness menu when Auto DIM is

 

OFF). With Auto DIM ON, brightness is now controlled by the light sensor located

 

at top center of the front bezel. See additional discussion of this feature further in

 

this section.

■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

5

Image 7
Contents Experience the Aspen Touch Disclaimer Aspen ATM-173R Series Touch Monitor Product Manual Table of ContentsAmtft LCD panel Usage Notice IntroductionConnections and Installation Button Symbol Button Name Normal Function Display Setup and On Screen DisplayOSD Controls Auto DIM OSD Menu and FunctionContrast and Brightness OSD ToolPage Touchscreen and Touchscreen Drivers Windows 98/Me/NT/2000/XP InstallationLinux Installation DOS InstallationOEM SpecificationsHD15VGA EMI FCC/B Glossary Mounting Template Aspen Touch Solutions, Inc. Product Warranty Page Template will print on one sheet of 11 x 17 paper