Aspire Digital T130 manual Installing the Modem card, CD-ROM, Floppy and HDD

4.Connect the main ATX power connector to the motherboard as shown here.

Installing the Modem card, CD-ROM, Floppy and HDD

NOTE: There have the hook lock on CD-ROM, floppy and HDD cage, in other words, please move a little bit forward to release the lock then you can install these parts smoothly.

1.Insert the HDD to the bracket by following the instructions here.

2.Place the HDD module back to the original position.

3.Place the floppy drive back to the original position.

4.Place the CD-ROM drive back to the original position.

5.Connect the HDD power cable and IDE cable.

6.Connect the floppy cable and power cable.

58 Chapter 3