ANUBIS Wireless Access Point instruction manual AP Device Manager, Setting up profiles

Page 14

Typhoon Speednet Wireless Access Point

AP Device Manager

When the USB cable is connected, the AP will enter configuration mode. Double-clicking the icon on the desktop will start the AP Device Manager.

Note: While the AP is in "configuration mode" (when the USB cable is inserted), the AP will not function in the network. Upon removal of the USB cable, the AP will resume its normal operation.

After the application starts, it will display a general information screen which provides information for the current Multimedia and Wi-Fi settings.

•Setting up profiles

-To edit these settings, select either the "Multimedia profile" or "Wi-Fi profile" from the Profile menu. All relevant settings for both Wi-Fi and Multimedia mode can be set or modified. Note that the separate profiles allow for unique settings (i.e. different SSID or network names) in each mode.

The list below outlines all user-configurable AP settings.

13

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Typhoon Speednet Wireless Access Point Declaration of Conformity Copyright Federal Communication Commission Interference Statement Potential restrictive use Manual Contents Introduction Package ContentsSafety Precaution Minimum System RequirementsInstallation Procedure Installing the HardwareWindows ME/2000 Installing the AP ManagerWindows Device & Network Management Network ManagerDevice Manager Page Adding nodes to the network Multimedia mode only Network ManagementSetting up profiles AP Device ManagerSetting up IP/SNMP settings Subnet MaskSwitches and Connectors Windows 2000/XP Uninstall Hardware & SoftwareWindows 98/ME Technical Specification LED4 LAN, LED5 WANTroubleshooting Hotline and Service Information Land Hotline Number What is Dsss What is Fhss And what are their differencesWhat is Spread Spectrum
Top Page Image Contents