ANUBIS Wireless Access Point instruction manual Technical Specification, LED4 LAN, LED5 WAN

Page 18

Typhoon Speednet Wireless Access Point

C h a p t e r

5

Technical Specification

•Standard: Wi-Fi (IEEE 802.11b) and MM/QoS (IEEE 802.11e-type)

•Signal Type: DSSS (Direct Sequence Spread Spectrum)

•Frequency Band: 2.400 GHz ~2.4835GHz

•Modulation: QPSK / BPSK / CCK

•Ports Two RJ 45, One USB

•Ethernet Interface: IEEE 802.3; 10BaseT

•Antenna: Two External Dipole Antenna

•Channel: 11 Channels (US, Canada), 13 Channels (Europe), 14 Channels (Japan)

•Data Rate: Up to 11 Mbps (with automatic Fall Back)

•Transmit Power Output: Typically 20 dBm

•Receive Sensitively: Typically – 83 dBm

•Compatibility: Windows 98/ME/2000/XP

•LED Indicators: LED1: Power, LED2: Radio Activity, LED3: Wi-Fi compliant or Multimedia,

LED4: LAN, LED5: WAN

•Power Supply: Input: AC 100-240, 47-63Hz, 0.3A, Output: DC 5 V / 2A

•Certification: FCC, R&TTE

•Dimensions: 142x88x28mm

•Weight: 128g

17

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Typhoon Speednet Wireless Access Point Declaration of Conformity Copyright Federal Communication Commission Interference Statement Potential restrictive use Manual Contents Introduction Package ContentsSafety Precaution Minimum System RequirementsInstallation Procedure Installing the HardwareInstalling the AP Manager WindowsWindows ME/2000 Device & Network Management Network ManagerDevice Manager Page Adding nodes to the network Multimedia mode only Network ManagementSetting up profiles AP Device ManagerSetting up IP/SNMP settings Subnet MaskSwitches and Connectors Uninstall Hardware & Software Windows 98/MEWindows 2000/XP Technical Specification LED4 LAN, LED5 WANTroubleshooting What is Dsss What is Fhss And what are their differences What is Spread SpectrumHotline and Service Information Land Hotline Number
Top Page Image Contents