AOC Q2963Pm user manual Power

Page 5

Power

The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug.

Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect the monitor from damage due to power surges.

Do not overload power strips and extension cords. Overloading can result in fire or electric shock.

To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between 19V, 3.42A

The wall socket shall be installed near the equipment and shall be easily accessible.

For use only with the attached power adapter (Output 19Vdc) which have UL,CSA listed license (Only for monitors with power adapter).

Manufacturers:

1)TPV ELECTRONICS(FUJIAN) CO., LTD model: ADPC1965

2)SHENZHEN HONOR ELECTRONICS CO., LTD. / model: ADS-65LSI-19-1 19065G

5

Image 5
Contents Q2963PM LED backlight Page Ease Programe TCO Document National Conventions SafetyPower Installed on the wall Installed with stand InstallationCleaning Other Contents in Box SetupSetup Base Wall Mounting Adjusting Viewing Angle MHL Mobile High-Definition Link Using MHLMobile High-Definition LinkUsing MHL SUB DP-IN DVI HDMI/MHL DP-OUT Connecting the MonitorDaisy Chain Setting Optimal Resolution AdjustingWindows Vista For Windows VistaClick Settings Click Control Panel Click Display SettingsClick Settings Windows ME/2000For Windows WindowsClick Display Hotkeys Basic and simple instruction on the control keys OSD SettingLuminance Image Setup Color Setup Picture Boost OSD Setup PIP Setting Auto Detect set to Off ExtraAuto Detect set to On Status LED Color LED IndicatorSet the View by to Large icons or Small icons DriverMonitor Driver Click on the Display icon Click the Driver tab Page Windows Page Page Windows Vista Page Select Monitor Windows MEMenu Saver Screen+ Troubleshoot Off-Mode Monitor Is Stuck In ActiveMissing one of the primary Colors RED, GREEN, orGeneral Specification SpecificationFREQUENCYkHZ FREQUENCYHz Preset Display ModesPin Assignments Pin Color Display Signal Cable Pin No Signal NameGND Plug and Play Plug & Play DDC2B FeatureFCC Notice RegulationWeee Declaration for India Weee DeclarationEpeat Declaration Warranty Statement for Europe ServicePage Page Page Ease Programe TCO Document