Sanyo DWM-4500 Adjusting the Speaker Volume Balance, Adjusting the Sub-woofer Level

Page 20

Adjusting the Speaker Volume Balance

This unit is set to the standard level before shipping from the factory. You may not need any adjustment.

However, depending on the size of the room and the placement of the speakers, you may benefit from a fine adjustment.

In this case, follow the steps below. Please use the remote control when the test tone sounds.

Note:

Do not connect the headphones.

1.Press [FUNCTION] to select “DVD/CD”.

2.Press [n] to stop playback completely.

3.Press [TEST] on the remote control.

The “Speaker” screen appears on the TV screen.

“FNT-L 0” appears on the display.

The test tone will be heard from each speaker sequentially as follows:

TV screen

FL display

Speaker

Front-L

FNT-L 0

Front left speaker

Center

CENT 0

Center speaker

Front-R

FNT-R 0

Front right speaker

Surround-R

SUR-R 0

Rear (surround right) speaker

Surround-L

SUR-L 0

Rear (surround left) speaker

Note:

There are Surround left and right speakers in the rear speaker.

4.Press [VOLUME] + or - until the test tone becomes a comfortable level.

5.If the test tone level is not the same from each speaker, press [p] or [o] to adjust it while the speaker is activated.

The level appears on the TV screen and display.

Front-L: “-10” ~ “0” appears.

Center: “-10” ~ “+10” appears.

Front-R: “-10” ~ “0” appears.

Surround-R: “-10” ~ “+10” appears.

Surround-L: “-10” ~ “+10” appears.

If necessary, repeat this step again.

6.Press [TEST] to turn the test tone off. Note:

If no adjustments are made, the original display returns after the test tone has cycled around 5 times.

Adjusting the Sub-woofer Level

Note:

Do not connect the headphones.

1.Press [TRIM] while holding [SHIFT] down. “FNT-L 0” appears on the display.

Note: No test tone.

2.Press [ENTER] repeatedly to select “SUB.W 0”. Note:

Each time the button is pressed, the display will show the selected speaker and tone level.

3.Press [p] or [o] to adjust the level as desired. SUB.W: “-10” ~ “+10” appears.

Note:

If another speaker is selected, the level can also be changed as above.

4.Press [TRIM] while holding [SHIFT] down to turn it off. Note:

If no adjustments are made, the original display returns after approximately 10 seconds.

IMPORTANT INFORMATION:

Set the delay time for your center and surround speakers. See “Setting Audio” on page E36.

-E19-

Page 19 Page 21
Image 20
Page 19 Page 21
Contents SANYO’S HELP-LINE Please Read This ManualContents Accessories Black and WhiteBlack and Red Black and GreenSafety Certification For Safe and Efficient OperationImportant Information Main unit DVD Receiver Rear speaker Powered speakerControls MULTI-BRAND TV Remote Control Remote control range To set the remote control code for TVInserting batteries Important NoteBasic Connections System Cable ConnectionExample To use Main unit horizontally Example To hang Main unit on a wallFront left speaker Center speaker Front right speaker Speaker Wire Color UseSpeaker Connections Speaker Placement Example To hang the speaker on a wallUsing the Rear Speaker in Wireless Mode Using the Rear Speaker in Wired ModeUsing Video OUT jack Sub-woofer Powered speaker Important InformationConventional TV Connection Main unit Right sideUsing RF Modulator Sub-woofer Powered speaker RF Modulator HiFi Stereo VCRRF Modulator Example Sub-woofer, VCR, TV and RF Modulator connectionsProgressive-scan TV Connection Use of your VCR and Sanyo DVD Home Theater System DWM-4500TV with progressive-scan capability Progressive ScanningPower Supply Sub-woofer and Rear Speaker Headphones jack PhonesFM Antenna Connection Additional Connection ExamplesBefore Operation Common OperationSelecting Surround Mode Function FL display DescriptionTV screen FL display Speaker Adjusting the Speaker Volume BalanceAdjusting the Sub-woofer Level Playable Discs Disc Playback PreparationsImportant Note 43 LB 43 PS 169 LetterboxSelecting Picture Mode Basic PlaybackMenu Never touch the lensStopping Playback Selecting a Top Menu DVDSelecting a DVD Menu Chapter Track SkipTitle Search DVD Chapter Search DVDTime Search DVD Time Search CDFast Playback Slow Motion Playback DVDStill Picture Pause Frame by Frame Advance Playback DVDRepeat Playback Viewing from a Desired Camera Angle Multi-Angle DVDDesignated Range Repeat Playback A-B Repeat Random Playback CD Programmed Playback CDSelecting Subtitle Language DVD Selecting Audio Soundtrack Language Multi-Language DVDSelecting On-Screen Information Example for DVDBefore Setting Setting TVGuardianHow It Works After Setting TVGuardian On MuteContinuous After , you must set the parental lock as shown belowMP3/WMA CD Playback MP3/WMA CD OperationBefore Starting Picture Disc Operation Kodak Picture/JPEG CD PlaybackInitial Settings Setting LanguageSetting Display Setting TV typePress 5 to skip TV System Ntsc If you accidentally change the TV SystemSetting progressive mode If Progressive is not selectedRear speaker Surround left and right speakers delay time Setting AudioCenter speaker delay time Setting Parental If you forget the password…Parental Control To Lock the Disc DoorLanguage Code List Code Abbreviation LanguageAutomatic/Manual Tuning To Preset StationsListening to Preset Stations Listening to the Radio FM onlySleep Timer Operation MaintenanceTroubleshooting Guide Enjoying Other SourcesE41 Specifications Weekdays 730 AM 400 PM Central Time ObligationsExclusions Model No Serial No Date of Purchase

DWM-4500 specifications

The Sanyo DWM-4500 is a state-of-the-art dual cassette deck that has earned a reputation for its superior sound quality and versatile playback capabilities. Introduced in the late 1990s, this model showcases Sanyo’s dedication to audio excellence, specifically designed for music enthusiasts who appreciate the nuances of analog recording and playback.

One of the main features of the DWM-4500 is its dual cassette mechanism, allowing users to play and record from both tape decks. This feature is particularly beneficial for those who wish to compile mixtapes or transfer music from one cassette to another without needing an external device. Additionally, the ability to select either tape deck for playback offers flexibility and convenience, appealing to dual cassette collectors.

The DWM-4500 is equipped with high-speed dubbing capabilities, enabling rapid copying of cassette recordings. This means users can effortlessly create duplicates of their favorite tapes, maintaining quality while saving time. The system supports both normal and high-speed dubbing, accommodating a variety of user needs.

In terms of sound quality, Sanyo has integrated advanced noise reduction technologies, such as Dolby B and C, which effectively minimize background hiss typical in cassette tapes. This ensures that recordings maintain clarity and fidelity, allowing listeners to experience music as it was intended by the artist.

Another noteworthy characteristic of the DWM-4500 is its user-friendly interface. It features an easily navigable control panel that allows for precise adjustments, including pitch control and cueing options. The LCD display provides clear visibility of settings and track information, enhancing the overall user experience.

The robust construction of the DWM-4500 also stands out. Designed with durability in mind, the unit features high-quality materials to withstand regular use, making it a reliable choice for both casual listeners and dedicated audiophiles.

In summary, the Sanyo DWM-4500 is a remarkable cassette deck that combines functionality with high-quality audio performance. Its dual cassette capability, high-speed dubbing, noise reduction technologies, and intuitive design make it a must-have for anyone looking to rediscover the charm of cassette tapes while enjoying modern audio conveniences.
Top Page Image Contents