Sanyo DWM-4500 Basic Playback, Selecting Picture Mode, Menu, Never touch the lens

Basic Playback

When operation buttons are pressed, that operation is displayed on the TV screen. The display disappears after several seconds.

1.Press [z/ON] to turn the power on.

2.Press [FUNCTION] to select “DVD/CD”.

3.Press [q].

“OPEN” appears on the display and the disc door opens.

4.Place the disc (label facing toward you) on the disc turntable until it clicks.

Label facing toward you

CAUTION:

Never touch the lens!

5.Press [q] to close the disc door.

•“CLOSE” ---> “READING” appears on the display.

•Playback starts automatically.

Example:

Chapter number Elapsed playing time

Note:

Some discs may not start playback automatically. In such case, press [a] (Play) to start playback.

CAUTION:

Do not touch the disc door while it is closing. This will damage the inside of the unit and the disc.

Notes:

•In some discs, even if 4:3 PS is selected, the black bands may remain on the screen.

•If the disc is loaded with the label side downward (and it is a single sided disc), or if a badly scratched disc is loaded, “NO DISC” (or “NO PLAY”) appears. If this occurs, load the disc correctly or replace the disc.

If a DVD disc menu screen appears on the TV screen...

MENU
Play					￿	TV
Languages & Audio
			Movie
				Set-
				Up￿
	Subtitles￿
Theatrical		Trailers￿
Scene
	Selections

1.Press [o], [a], [p] or [b] (or the number buttons) to select the desired menu.

2.Press [ENTER]. Playback of the selected menu starts.

Note:

For more details, please refer to the jacket or case of the disc.

Selecting Picture Mode

1. Press [PICTURE MODE]. “Video Enhance” screen appears.

2.Press [5] or [4] to select “Brightness” or “Edges”.

3.Press [a] or [b] to adjust the level as desired. Usually set “0”.

4.Press [PICTURE MODE] again to close the screen.

-E22-