Installing the monitor on the wall, Power connection

Connection and preparation of the monitor

Installing the monitor on the wall

The monitor conforms to the wall-mounted VESA standard. Please refer to the instructions for product specifications and details.

To ensure your own safety and that of the monitor, use only the specified wall-mounting bracket. Please note that wall mounting must be done by a professional technician.

When the monitor is mounted on a wall it must be possible to access the connectors at the back. At least 6cm of clearance will be needed between the monitor and the wall to ensure that there is enough space to insert the connection cables.

It is important that air should flow freely through the ventilation slots wherever the monitor is installed.

Do not install the monitor in a confined space.

Power connection

Insert one end of the power cord into the “Power Input” socket on the back and plug the other end into a 220V power socket.

The monitor consumes a small amount of power in standby mode.

But it should be unplugged from the power socket if it is not to be used for some time.