64 en Network Communications | Conettix Communications Receiver/ | ||||
| Gateway | ||||
|
|
|
| ||
|
|
| |||
| 4. | Press Down to view 6.2.5 Network Adapter Enabled, and then verify it is a value of 2 and | |||
|
| press Enter. If the value is not 2, press Enter>[2]>Enter. |
|
| |
| 5. | If the D6100IPv6 has encryption enabled, press Down until viewing 6.2.6 Network |
| ||
|
| Encryption Enabled and set it to 1 using the same method as above. |
| ||
|
|
|
| ||
i | Notice! |
|
| ||
If using Network Automation, it is recommended that this be setup done using the D6200 af- | |||||
| ter it can communicate with the D6100IPv6. |
|
| ||
|
|
| |||
| 6. | Press Cancel and press Down until viewing 6.4 D6200 Network Connections, and then | |||
|
| press Enter. |
|
| |
| 7. | Press Enter to enter the IP address into 6.4.1 or Login Password into 6.4.6 of the host | |||
|
| computer that is running the D6200 Software. |
|
| |
|
|
|
| ||
| Notice! |
|
| ||
i | When entering an IP address through the keypad of the D6100IPv6, press the UP button for a | ||||
“.” in a IPv4 address and the DOWN button for a “:” in an IPv6. For example enter IP address | |||||
| |||||
| 192.168.1.3 as: [1][9][2][∆][1][6][8][∆][1][∆][3][ENTER]. |
|
| ||
|
|
| |||
| 8. | Verify that 6.4.5 Network Programming Enable is a 1. If the value is not 1, press Enter | |||
|
| [1] Enter. |
|
| |
| 9. | Press Cancel repeatedly to return to the idle stage (the time and date show on the LCD). | |||
12.5 | D6100i Configuration Setup Instructions |
|
| ||
| The instructions in this section are for legacy D6100i modules. |
|
| ||
12.5.1 | Identifying the MAC Hardware Address |
|
| ||
| You must program the IP address of the module. The first step is to determine the MAC, or | ||||
| hardware, address of the module. This address is | ||||
| manufacture and cannot be changed. This address is 6 bytes (12 digits) long. |
|
| Figure 12.7: MAC Address Label Example |
|
|
i | Notice! |
The MAC address label is located on the rear of the module below the Ethernet port. | |
| Record this number for future reference. |
|
|
12.5.2 | Obtaining an IP Address |
| Provide the module’s MAC address to the site’s network administrator, who then assigns an IP |
| address for the D6100IPv6. |
2012.11 08 4998122704 | Installation and Operation Guide | Bosch Security Systems, Inc. |