Conettix Communications Receiver/ | Network Communications en 49 | |
Gateway | ||
| ||
|
|
Notice!
Verify the IP address, subnet mask, and all other listed information. This information should match the IP and subnet mask you assigned to this computer in the previous steps.
i If you have chosen to program the D6600/D6100IPv6’s initial network parameters using the direct null modem serial connection, continue with the following steps. These steps are nec- essary only if the host computer running the D6200 Software is connected to the D6600/ D6100IPv6’s COM4 port using a direct NULL modem serial cable.
Selecting a baud rate:
1.Select Start → Settings → Control Panel to open the Control Panel.
2.When the Control Panel window opens,
3.The System Properties window opens.
4.Select the Hardware tab.
5.Click the Device Manager button. A hardware tree appears showing all the devices connected to the PC.
6.Click the plus sign [+] next to Ports (COM & LPT) to reveal the individual ports.
Bosch Security Systems, Inc. | Installation and Operation Guide | 2012.11 08 4998122704 |
