Bosch Appliances D6600 9.4.1, Minimum Standby Battery, Device, V Battery Standby, Current, 4 hr

28 en Power	Conettix Communications Receiver/
	Gateway

11.5 V to 10.2 V		Battery Low
Below 10.2 V		Battery Bad				Battery Missing
Table 9.1: Battery Voltage Display
Device		Qty	12 V Battery Standby		UPS AC Standby Current
			Current
D6600	(one D6640/ D6641/	1	800 mA	800 m	350 mA		350 mA
D6645	Card)			A
Additional D6640/ D6641/			210 mA x Qty (2		35 mA x Qty (2
D6645	Cards		to 7)		to 7)
Additional D6650/D6655			300 mA x Qty (1		50 mA x Qty (1
Cards			to 8)		to 8)
D6672	COM1 Adapter		10 mA (if		2 mA (if
			installed)		installed)
Total Standby Current:					Total UPS
					Current:
Table 9.2: Calculating Standby Current for the D6600

The standby current required for the D6600 depends on the number of optional cards installed in the receiver. Use the table above to calculate the D6600 standby current. The standby current required by the D6100IPv6 is listed in the table below.

		12 V Battery Standby		UPS AC Standby Current
		330 mA		250 mA
		Table 9.3: Standby Current for the D6100IPv6
	i	Notice!
		18 Ah batteries are required to meet 24-hour standby requirements.
9.4.1		Minimum Standby Battery
		The table below shows the maximum standby current for common rechargeable battery
		capacities at 4-hour, 8-hour, and 24-hour standby periods. If the standby current is larger than
		the value listed, you must use the next larger capacity battery.
		Rechargeable Battery	Maximum Standby Current (mA)
		Capacity
			4 hr		8 hr	24 hr
		7 Ah	1400		700	230
		8 Ah	1600		800	265
		18 Ah	3600		1800	600
		Includes 20% battery de-rating storage factor

2012.11 08 4998122704 Installation and Operation Guide Bosch Security Systems, Inc.