Bosch Appliances installation and operation guide 12.3, Special Conettix D6600 Applications

Models: D6600

1 88
Download 88 pages 54.03 Kb
Page 56
Image 56
Obtaining the Latest D6200CD Software

56 en Network Communications

Conettix Communications Receiver/

Gateway

 

 

 

One additional static IP Address

A D6672 COM1 Expansion Kit for the D6600

1.D6686/D6682/D6680 Number 1 is the network adapter that is currently running.

2.Assuming the first D6686/D6682/D6680 is already set up and running, connect the second D6600 on COM1 to the D6600.

3.Enable encryption in the second D6686/D6682/D6680 as described in the Conettix D6680 Network Adapter Installation Guide (P/N: 4998138732), the Conettix D6682 Network Ethernet Adapter Installation Guide (P/N: F01U078049), or the Conettix D6682 Network Ethernet Adapter Installation Guide (P/N: F01U274796).

4.Add a receiver to the list of receivers under Administration Connection Settings with the IP address and encryption key of the second D6686/D6682/D6680.

5.Select the receiver name added in the previous step.

6.Verify that the D6200 can communicate with the D6600.

7.Program field devices to communicate with the encryption enabled D6686/D6682/D6680:

– Verify that the TTL-E NIM has the correct firmware (v5.16 or later).

– Enable encryption on the NIM device with the same key that is entered in the D6686/ D6682/D6680.

– If the device is a C900TTL-E/C900V2, change the destination IP address to match the IP address in the encryption-enabled D6686/D6682/D6680.

– If the device is a D9133TTL-E/DX4020, change the destination IP address that is currently programmed for the control panel to the encryptionenabled D6686/D6682/D6680.

4 The devices that are programmed with encryption communicate through the encryption- enabled D6680 (v5.16 or later)/D6682, while the non-encrypted devices, or those using encryption v5.1 or earlier, communicate through the original D6686/D6682/D6680.

Obtaining the Latest D6200CD Software

If you do not already have the latest D6200CD (v1.24 or later), you can obtain a correct CD by of the following methods:

Call and order a D6200CD from the Bosch Customer Service group by calling 1-800-289-0096.

Download the released software, firmware, and documentation from the Bosch web site. Connect to the company web site: www.boschsecurity.us, then search for D6600. You can download software, firmware, and documentation from the Conettix D6600 product page.

i

Notice!

Download times can vary depending on the speed of yoru internet connection.

 

Read the D6600/D6100IPv6 Release Notes (P/N: 4998122709) for the latest information regarding software installation, changes, and added features.

 

i

Notice!

 

A decompression program that handles .zip files is required in order to open the zipped file.

 

 

 

 

 

12.3

 

Special Conettix D6600 Applications

The following special application has been requested by Bosch dealers. It is included here to assist you if you have the same requirement. If you have any questions, contact Technical Support at (800) 289-0096.

Emulating a Direct Serial Connection Over a LAN Using D6680/D6682 Ethernet Network Adapters

2012.11 08 4998122704

Installation and Operation Guide

Bosch Security Systems, Inc.

Page 56
Image 56
Bosch Appliances 12.3, Special Conettix D6600 Applications, Obtaining the Latest D6200CD Software