26 en Installation | Conettix Communications Receiver/ | |
Gateway | ||
| ||
|
| |
|
|
i | Notice! | ||
Ensure that a switch does not control the outlet. | |||
| |||
|
|
| |
|
| Turn the D6600 power switch on. The D6100IPv6 starts as soon as you plug in the AC | |
|
| ||
|
| ||
| Transformer. | ||
|
| Set the calendar and clock to the correct date and time and program the necessary | |
|
| ||
|
| ||
| options. | ||
|
| Ensure that the communication formats are correct by having communicators send test | |
|
| ||
|
| ||
| reports to each line connected to the receiver. | ||
8.2 | Rack Mount Instructions | ||
| Refer to the specific installation guide supplied with your product. | ||
8.3 | Removing Power to the Receiver | ||
| 1. Remove the battery power connection. | ||
| 2. Turn off the AC power on the D6600 or unplug the D6100IPv6 AC transformer. | ||
| 3. Unplug the AC cord from the outlet. | ||
|
| ||
| Warning! | ||
! | Do not try to restart the D6600/D6100IPv6 with a fully discharged battery. Reconnect after | ||
you apply power. To prevent deep battery discharge, use a D135A Low Battery Cutoff Module. | |||
| |||
| Refer to the D135A Installation Guide (P/N: | ||
|
| ||
|
| ||
i | Notice! | ||
If programmable Output 1 or 2 is activated by automation failure, you cannot clear Output 1 | |||
| or 2 by pressing the Acknowledge key. | ||
|
|
|
2012.11 08 4998122704 | Installation and Operation Guide | Bosch Security Systems, Inc. |