Conettix Communications Receiver/ | Power en 27 | |
Gateway | ||
| ||
|
|
9 | Power |
|
| |
9.1 | Power Supply Modules |
|
| |
9.2 | Main Power |
|
| |
| D6600 Power Input |
|
| |
|
|
|
|
|
| AC Nominal Operating Range |
| 120 | V or 230 V |
|
|
|
|
|
| AC maximum Operating Range |
| 100 | VAC to 120 VAC, 220 VAC to 240 VAC, |
|
|
| 2.5 A maximum | |
|
|
|
| |
| Power Cord |
| IEC 60320 C13 type | |
|
|
|
| |
| Replaceable Fuse |
| 2.5A F250V Fast blow 5x20mm | |
|
|
|
|
|
D6100IPv6 Power Input
AC Nominal Operating Range
18VAC (Refer to the specific Installation Supplement supplied with your product for your application for supplied transformer specifics)
9.3 | Standby Power | |
|
| |
i | Notice! | |
Refer to the appropriate Installation Supplement included with your product for the specifics | ||
| of your particular installation. | |
|
| |
| During a loss of AC power, the receiver automatically switches to standby power. External | |
| batteries or an uninterruptible power supply (UPS) provides standby power. As long as there | |
| is adequate standby power, the receiver’s operation is not interrupted, even if the power loss | |
| occurs during signal processing. When power supervision is enabled and a loss of AC power | |
| occurs, the primary reporting devices (such as printers and computers) show AC FAIL and the | |
| D6600/D6100IPv6 power indicator starts blinking. When AC power restores, the power | |
| indicator stops blinking and reporting devices show AC RESTORE. | |
9.4 | Connecting External Batteries | |
|
| |
| Notice! | |
i | Do not connect an external battery charger to the D6600/D610IPv6 or its battery. There is a | |
risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries ac- | ||
| ||
| cording to the instructions. | |
|
|
Use the terminal on the rear panel to connect an external DC power source. During AC power outages, the external DC source supplies power to the receiver. Use a 12 VDC, 7 to 18 Ah
| Battery Voltage | Display during AC power | Display if no battery when |
|
| outage | AC power is restored |
|
|
|
|
| Above 11.5 V | Battery OK |
|
|
|
|
|
|
|
|
|
Bosch Security Systems, Inc. | Installation and Operation Guide | 2012.11 08 4998122704 |
