AOC e941Sw manual Power

Page 5

Power

The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug.

Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect the monitor from damage due to power surges.

Do not overload power strips and extension cords. Overloading can result in fire or electric shock.

To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between 100 - 240V AC, Min. 5A

The wall socket shall be installed near the equipment and shall be easily accessible.

For use only with the attached power adapter (Output 12Vdc) which have UL,CSA listed license (Only for monitors with power adapter).

5

Image 5
Contents Page Page Page National Conventions SafetyPower Installation Cleaning Other Contents in Box SetupSetup Stand & Base Adjusting Viewing Angle Connecting the Monitor Wall Mounting Setting Optimal Resolution AdjustingWindows Vista For Windows VistaClick Display Settings For Windows XP Windows XPClick Settings Click Control Panel Click SettingsWindows ME/2000 For Windows ME/2000Power Auto/Exit Eco Mode Or wide/ Menu/EnterHotkeys Or wide image ratioBasic and simple instruction on the control keys OSD SettingPresss Menu to Menudisplay MENUto display menu LuminanceDCR Menu to enter Image SetupPress +/- select Clock 100 Adjust Picture Reduce Vertical-Line noise Phase Color Temperature Page Color Boost Page Picture Boost Page OSD OSD SetupOSD Extra SUB Reset Reset Yes or no Reset the menu to default Exit Status LED Color LED IndicatorWindows DriverMonitor Driver Click the Monitor tab and then click the Properties button Page Page Windows Vista Page Windows XP Page Page Windows ME Menu Troubleshoot Off-Mode Monitor Is Stuck In ActiveMissing one of the primary Colors RED, GREEN, orGeneral Specification SpecificationFREQUENCYkHZ FREQUENCYHz Preset Display ModesPin Assignments Plug and Play Plug & Play DDC2B FeatureFCC Notice RegulationHG Declaration Weee DeclarationEpeat Declaration Warranty Statement for Europe ServicePage Page Page How to get your Warranty ? Warranty Statement for AP