AOC 916SWA user manual Technical Support, Windows Vista, Frequently Asked Questions

Page 18

11.Click on the 'Open' button, then click the 'OK' button.

12.Select your monitor model and click on the 'Next' button.

-If you can see the 'has not passed Windows® Logotesting to verify its compatibility with Windows® XP' message, please click on the 'Continue Anyway' button. 13. Click on the 'Finish' button then the 'Close' button.

14. Click on the 'OK' button and then the 'OK' button again to close the Display_Properties dialog box.

Windows Vista

1.Start Windows® Vista

2.Click the Start button; select and click on 'Control Panel'.

3.Select and click on 'Hardware and Sound'

4.Choose 'Device Manager' and Click on 'Update device drivers'.

5.Select 'Monitor' and then right click on 'Generic PnP Monitor'.

6.Click on 'Update Driver Software'.

7.Select 'Browse my computer for driver software'.

8.Click the 'Browse'button and choose the drive in which you've placed the disk. Example:(CD-ROM Drive:\\Lcd\PC\drivers\).

9.Click the 'Next' button.

10.Wait few minutes for installing the driver, and then click 'Close' button.

6. Technical Support

Frequently Asked Questions

Problem & Question

Possible Solutions

 

Make sure the power button is ON and the Power Cord is properly connected to a grounded power outlet

Power LED Is Not ON

and to the monitor.

 

 

 

In order for the Plug & Play feature of the monitor to work, you need a Plug & Play compatible computer

 

& video card. Check with your computer manufacturer. Also check the monitor's video cable and make

No Plug & Play

sure none of the pins are bent.

Make sure the AOC Monitor Drivers are installed (AOC Monitor Drivers are available at :

 

 

http://www.aoc.com)

 

 

 

Adjust the Contrast and Brightness Controls.

Picture Is Fuzzy & Has Ghosting Shadowing

Make sure you are not using an extension cable or switch box. We recommend plugging the monitor

Problem

directly to the video card output connector on the back of your computer.

 

 

Picture Bounces, Flickers Or Wave Pattern Is

Move electrical devices that may cause electrical interference as far away from the monitor as possible.

Use the maximum refresh rate your monitor is capable of at the resolution your are using.

Present In The Picture

 

 

 

 

The Computer Power Switch should be in the ON position.

 

The Computer Video Card should be snugly seated in its slot.

 

Make sure the monitor's video cable is properly connected to the computer.

Monitor Is Stuck In Active Off-Mode"

Inspect the monitor's video cable and make sure none of the pins are bent.

 

Make sure your computer is operational by hitting the CAPS LOCK key on the keyboard while observing

 

the CAPS LOCK LED. The LED should either turn ON or OFF after hitting the CAPS LOCK key.

 

 

Image 18
Contents National Conventions PrefaceAbout This Guide Product RegistrationSafety Introduction HG DeclarationSetup Setup the stand and baseAdjusting Viewing Angle Attaching the Cables Cable Connections On Back of Monitor and ComputerAttaching Wall Mounting Arm Using the MonitorSetting the Optimal Resolution External ControlsOSD Settings DCB Adjustment What is DCB?How to use Color Boost? Page Page Page How to use Picture Boost? DCR AdjustmentWhat is DCR? How to Use DCR?DCR Demos Function Control IllustrationLED Indicators Status LED ColorPage Windows ME DriversWindows Windows XPFrequently Asked Questions Technical SupportWindows Vista Specifications Product InformationPreset Display Modes EPA Energy StarFREQUENCYkHZ FREQUENCYHz Plug & Play DDC2B Feature Warranty StatementPin Number Pin Side of the Signal Cable Pin AssignmentsWarranty Statement AOC Color Monitors sold within Europe
Related manuals
Manual 23 pages 56.36 Kb