AMCC 9690SA manual Copyright, Trademarks, Disclaimer

Page 2

Copyright

©2004-2008 Applied Micro Circuits Corporation (AMCC). All rights reserved. This publication may be copied or reproduced for reference purposes only. All other purposes require the express written consent of AMCC, 215 Moffett Park Drive, Sunnyvale, CA 94089. AMCC shall not be responsible or liable for, and shall be held harmless against, any and all damages, claims, and/or disputes that arise from the copying or reproduction of this publication.

Trademarks

3ware®, Escalade®, 3DM®, and TwinStor® are all registered trademarks of AMCC. The 3ware logo, 3BM, Multi-Lane, StorSave, StorSwitch, StreamFusion, and R5 Fusion are all trademarks of AMCC. PowerPC and the PowerPC logo are trademarks of International Business Machines Corporation. Linux® is a registered trademark of Linus Torvalds in the United States, other countries, or both. Windows® is a registered trademark of Microsoft Corporation in the United States and other countries. Firefox® is a registered trademark of the Mozilla Foundation. PCI Express® is a registered trademark of PCI-SIG®. All other trademarks herein are property of their respective owners.

Disclaimer

While every attempt is made to make this document as accurate as possible, AMCC assumes no responsibility for errors or omissions in this document, nor does AMCC make any commitment to update the information contained herein.

ii3ware 9690SA SAS/SATA RAID Controller Installation Guide

Image 2
Contents 3ware 9690SA SAS/SATA RAID Controller Disclaimer CopyrightTrademarks Table of Contents About this Guide Contents of this Package Getting Started3ware 9690SA SAS/SATA RAID Controller Installation Guide 9690SA RAID Controller Card ModelsCables CablesOther Available Cables Multi-lane Cable Serial ATA SFF-8087System Requirements Motherboard and Slot RequirementsOperating System Requirements Safety Information Site SelectionProtecting Equipment and Data Installation Considerations Tools You Need Before You StartInstall the Controller in the Computer Inserting Controller Into PCI Express Slot Attach the Cables to Your Controller Connect the Cables to Backplanes External Enclosure ConnectionConnect Battery if appropriate Finishing Up the RAID Controller InstallationConfigure Your RAID Arrays Check Installation and Close the CaseInstalling a Battery Backup Unit Items in Remote Battery Installation PackageInstalling the Control Module To install the control module Installing the Remote Battery BBU control module connected to the controllerThree locations for mounting battery on remote board Attaching the battery module to the remote board Installing the Remote Battery Replacing the Battery Removing the power cable from the BBU module Removing the battery module Sales and ordering information Feedback on this manual
Related manuals
Manual 31 pages 300 b